PDA Dyno OBD2 Diagnostic Tool Screens

Graphing the Data Once the data is processed and the output data files created, you can use the PC Software's powerful graph tool to examine and print your results.
Dyno Setup This shows the Dyno Setup parameters used on a run. Parameters such as vehicle weight, elevation and humidity are all saved at the time the run was performed. Get current weather conditions in your area here. Get vehicle data here. Weight – weight of the vehicle including passengers. Temp – current outside temperature. Elevation – current elevation. Humidity – current outside humidity. Pressure– current outside altimeter pressure available here. Altimeter pressure is different than barometric pressure. Drag – drag coefficient of vehicle. Available data here. Frontal Area – frontal area of vehicle. Available data here.
Animation Control You can move the cursor on the main graph with the slider, or enter a value in seconds in the box. Data at the cursor point is shown at the bottom of the graph. Setting a value in the speed box, and pressing the Animate button will automatically "drive" around the test data. You can see the red animation cursor here. The graph pad shows detail of the data.
2D Graph
Recorded Sensors Graph Record 11 Sensors in addition to the GPS data.
For additional information please download the G-Dyno ™ Plus User Manual here.