Coolant Treatment and Additive Improved Heat Transfer Biodegradable

• Automotive
• Industrial Chillers
• Improves Heat Transfer
• Lowers Coolant Temperature up to 30EF
• Prevents Electrolysis
• Prevents Cavitation, Rust and Corrosion
• Inhibits Bacterial Growth
• Harmless to Paint and Metals
• Prevents Scaling, Corrosion, Rust and Gumming
• Mixes with Water or Antifreeze
• Contains no Chromate, Phosphate, Borate, Soluble Oils or Heavy Metals
• Prevents Thermostats from Sticking
• Does not Increase Viscosity of Water

Introduction:
Not-Hot® is a liquid additive for preventative maintenance and basically consists of a pH stabilizer, heat transfer improver, oxygen scavenger to prevent cavitation, corrosion and pitting and is a lubricant for water pump seals and thermostats. When mixed with water or antifreeze solution the coolant becomes virtually nonconductive and therefore inhibits electrolysis. The unique formulation lowers coolant temperature up to 30EF, dissolves deposits and prevents new scale built up.

Product Description:
Not-Hot® softens deposits until completely dissolved and deforms their natural crystalline shape so they cannot recombine and form solids. The cleaning action is done slowly and safely so not to disturb the deposits in chunks. Eventually all deposits are dissolved restoring coolant system efficiency. It also contains a surfactant which prevents bacterial growth and eliminates water surface tension by making hot-spots in the engine more accessible to the coolant, improving heat transfer. Not-Hot® is completely harmless to all metals and materials found in cooling systems and contains 12 corrosion inhibitors in a biodegradable, long life formulation.

Advantages:
Not-Hot® is compatible with all antifreezes and is biodegradable. Not-Hot® has passed the government safety tests for human handling and is classified as non-toxic and non-injurious. Not-Hot® is harmless to all paints and metals.

Not-Hot® has a built-in color strength indicator and when mixed with water becomes milky pink. The pink fades out as the inhibitor is used up. When the pink is nearly gone, add more Not-Hot® to maintain safe conditions. A cooling system treated with Not-Hot® does not require to be drained, because the suspended contaminants are rendered harmless. However, if the contamination is excessive, due to the heavy contamination of the system before the Not-Hot® cleaning action started, the color strength indicator cannot be observed and the system should be drained, flushed and retreated with Not-Hot®.

Not-Hot® comes in concentrated form and the initial dosage is only 4 ounces to every 5 gallons of coolant. To maintain effectiveness, add 2 ounces to coolant every 6 month.