Information: Back to PDA-Dyno™




pad

The Nology PDA-Dyno / OBD II Scan Tool software is easy to use. PDAs with Color and black-and-white screens are supported. An evaluation version can be downloaded from our Downloads page. See our Supported Sensors page for a complete list of sensors supported by the scan tool and the Product Features page for a complete list of features. 

Some of the software screens are shown below: 

Connect - this screen is the first to display. It offers brief instructions and a Connect button to initiate the connection process. 
General Information - displays general information about the vehicle’s test systems. If a system test is not supported by the vehicle, the display shows a dash ‘-‘ next to the status name.

Graph - displays real-time sensor measurements in a graphical format. A large trace buffer, pause, and zoom make analyzing data a breeze. 

All live data screens can record and playback data obtained from the vehicle. 0.5MB of Palm RAM will store approximately 1 hour of recording at the fastest sample rate.

Slide a marker around with the stylus to get an exact data point anywhere on the graph.

Dual Graph - displays real-time sensor measurements in a graphical format on two graphs. 

Slide a marker around with the stylus to get an exact data point anywhere on the graph.

Diagnostic Trouble Codes - displays the pending and stored Diagnostic Trouble Codes (DTC). If the vehicle’s Check Engine or Service Engine Soon light on the instrument panel is illuminated, a Stored DTC will be displayed. Pending DTC’s do not necessarily indicate a faulty component/system. If the vehicles test results indicate a failure after additional driving, then the Check Engine light will be illuminated and a DTC will be set in the stored DTC’s column.
DTC Lookup - tap a DTC to show a textual description of a numeric trouble code. 
Freeze Frame - displays the vehicle's freeze frame log. When a Diagnostic Trouble Code occurs that illuminates the Check Engine light, the vehicle’s computer saves the current values of the vehicle sensors at the moment the error occurred. 
Meter - displays real-time sensor reading from the vehicle in large, easy-to-read numbers at a distance. Up to two sensors can be monitored simultaneously. 
Sensor Select - this dialog displays when the Edit... button is pressed to provide sensor selection, units of measure, and polling speed among other things.

 

List - displays real-time sensor reading from the vehicle in list format. Up to five sensors can be monitored simultaneously. 

 

Oxygen Sensor - displays the vehicle’s oxygen sensor test results. Not all test values are applicable to all vehicles. Therefore, the list generated varies depending on vehicle.
DTC Search - this feature provides an interactive search through all the trouble code databases.



Copyright © Nology Engineering, Inc. All Rights Reserved.   



Products:

| HotWires | PDA-Dyno |ProFire | Spark Plugs | PowerCore | Profire Ignition Module | Testers | Distributor Cap| Ground Straps|




[Home] [About Us] [Back To Products]  [News]
[What They Say] [How To Buy] [Contact Us]