NOLOGY DOES NOT SUPPORT STREET RACING. OBEY ALL TRAFFIC LAWS. Info
If you want to know the horsepower and torque of your engine, or the 0 to 60 time of your car, or even the 1/8 mile or 1/4 mile time and speed, just use the Nology PDA-Dyno™.

Use it to check and clear the Diagnostic Trouble Codes (DTC), or to turn off the "Check Engine" light. --  Yes, the one that came on right after you did all those cool engine mod's. Perfect for when you have to get the car smogged.

Use it to monitor and record sensor values. --Lets say you want to upgrade your engine and you would like to know if that new trick air cleaner really gives you more power --- Do a baseline run and record the airflow data. Now install the new air cleaner and make another run (damn this is hard work). Now compare the air flow data. More air flow, more horsepower. Get it?

The PDA-Dyno™ turns your PDA into a Data Logger.--
Record several 1/4 mile runs and compare them later.

The PDA-Dyno™ turns your PDA into a Data Acquisition System.--
All OBD II supplied data can be recorded and stored.
Record all data during a road-race, or record your cars gas mileage (mpg) for a specific trip.-- A standard 8 MB PDA can hold hours of driving data (depending on free memory space). An affordable Data Logger.

The PDA-Dyno™ can also be used as an OBD II scan tool and supports all Generic OBD II Data such as: SAE J1850 (VPW, PWM); ISO 9141-2 (ISO); ISO 14230 (KWP 2000) and EU-OBD II.

Do all this and more, by simply connecting your own PDA (Palm, Handspring Visor, Sony Clié) to the cars OBD II connector under the dash using the supplied OBD II compliant cable (supports cars 1996 and newer).

 Worldwide Patents Pending

FEATURES more Product Features

Measure:
Horsepower and Torque
0 to 60 times
1/8 and 1/4 mile time and speed
Fuel Economy (MPG)

Display:
Generic OBD II Engine and Vehicle Information
Diagnostic Trouble Codes (DTC)
Displays real-time sensor data. Up to two sensors can be monitored and graphed simultaneously
Up to 5 sensors can be displayed in bar-graph and analog
Display following sensor types:
Load Value - Vehicle Speed - Coolant Temperature - Ignition Timing Engine RPM - Fuel Trim - Mass Air Flow - Intake Air Temperature Throttle Position - Fuel Pressure - Intake Manifold Pressure Oxygen Sensors. (Does not support Enhanced Powertrain Data)

Includes:
PDA-Dyno™/OBD II Interface Box
OBD II Interface Cable
PDA Data Cable
Software CD (includes manual)
Any PDA with Palm OS 3.0 or higher will work
PDA not included. Must be purchased separately.



Download PDA-Dyno™ Demo Software (.zip)

Download PDA-Dyno™ Manual (.pdf)

OBD II Trouble Codes (.pfd)

View OBD II Fault Codes On-line (.html)

OBD II Connector Location (.pdf)

OBD II Connector