Sequential Shift Light

Sequential Shift Light RS

Never over-rev your engine again and never miss a shift.

4 Ultra-Bright External LEDs
User Programmable
2,4,6 or 8 Cylinder Engines
Formula 1 Technology

Sequential Shift Light RS

The Shiftlight RS comes with the regular remote LED module, as well as with a pliable ultra-thin Velcro LED module. Both incorporate 4 LEDs that light up sequentially as the engineapproaches redline, with the shift point being indicated by the 4th (red) LED.

If you are a racer, or ride a motorcycle and wear a helmet, you have to take your eyes off the road and look at the tachometer. Even regular shift lights are usually not in your peripheral vision. The 4 LEDs enclosed in a piece of high strength Velcro, allows you to attach the LED module inside the helmet.

You can always see it coming. Even with your helmet on!

Mount the regular LED module of the SSL on the dash or on the A-pillar and mount the Velcro module of the SSL RS inside your helmet so it is always in you peripheral vision.

SSL Part#:        460 001 011               $ 171.50

 SSL RS Part#: 460 001 021              $  ....call

The Nology Sequential Shift Light (SSL & SSL RS) is a highly accurate, microprocessor controlled shift light, which can be easily adjusted using the “increase” and “decrease” buttons.

The SSL & SSL RS can be used with most 2, 4, 6, or 8 cylinder engines, including Direct Ignition and Waste Spark systems that use points, electronic ignition, or have an ECU Tach output. It can also be used with most capacitive discharge ignitions (CDI) with a Tach output.

The SSL has a small (40x16x13mm) remote LED module incorporating 4 LEDs that light up sequentially as the engine approaches redline. The shift point being indicated by the 4th (red) LED.

Mount the SSL on the dash or on the A-pillar, or anywhere you like. 

Installation Instructions

Technical Specifications: